Asynt – PTFE Reactor Lids

In stock

Asynt offer a wide range of factory assembled PTFE reactor lids to suit your ReactoMate lab reactor setup.  Utilising this robust, heat and chemically resistant material for your jacketed lab reactor gives you a strong and long lasting solution which can also easily be reconfigured….

Compare

Asynt offer a wide range of factory assembled PTFE reactor lids to suit your ReactoMate lab reactor setup.  Utilising this robust, heat and chemically resistant material for your jacketed lab reactor gives you a strong and long lasting solution which can also easily be reconfigured.

These pre-assembled PTFE reactor lids come in a range of diameters to suit your preferred vessel:

  • to fit 60 mm ID Schott type flanges
  • to fit 100 mm ID Schott type flanges
  • to fit 150 mm ID Schott type flanges
  • to fit 200 mm ID Schott type flanges

All taper joints are removeable and interchangeable for complete flexibility.  We also offer additional fittings and joints to enable you to alter your lid whenever required.

Specification

The information below is also available on our “Download” tab in a printable PDF format:

60mm PTFE Reactor lids

60 mm Diameter Lid – option 1
Base Port Type Taper Joint Port Size
Centre Port Vertical 24/- 1/2″ NPT
Side Port 1 10o x 10o Compound Angle 14/- 1/2″ NPT
Side Port 2 10o x 10o Compound Angle 14/- 1/2″ NPT
Side Port 3 10o x 10Compound Angle 14/- 1/2″ NPT
60 mm Diameter Lid – option 2
Base Port Type Taper Joint Port Size
Centre Port Vertical 24/- 1/2″ NPT
Side Port 1 10o x 10o Compound Angle 19/- 1/2″ NPT
Side Port 2 10o x 10o Compound Angle 19/- 1/2″ NPT
Side Port 3 10o x 10o Compound Angle 19/- 1/2″ NPT

100mm PTFE reactor lids

100 mm Diameter Lid – option 1
Base Port  Type Taper Joint Port Size
Centre Port Vertical 24/- 3/4″ NPT
Side Port 1 Vertical 24/- 3/4″ NPT
Side Port 2 10Angle 24/- 3/4″ NPT
Side Port 3 10Angle 19/- 3/4″ NPT
Side Port 4 10o x 10o Compound Angle 24/- 3/4″ NPT
100 mm Diameter Lid – option 2
Base Port Type taper Joint Port Size
Centre Port Vertical 29/- 3/4″ NPT
Side Port 1 Vertical 24/- 3/4″ NPT
Side Port 2 10Angle 19/- 3/4″ NPT
Side Port 3 10Angle 24/- 3/4″ NPT
Side Port 4 10o x 10o Compound Angle 29/- 3/4″ NPT

150mm PTFE reactor lid

150 mm Diameter Lid – option 1
Base Port Type Taper Joint Port Size
Centre Port Vertical 29/- 1″ NPT
Side Port 1 Vertical 24/- 1″ NPT
Side Port 2 Vertical 29/- 1″ NPT
Side Port 3 10o Angle 45/- 1″ NPT
Side Port 4 10o x 10o Compound Angle 29/- 1″ NPT
150 mm Diameter Lid – option 2
Base Port Type Taper Joint Port Size
Centre Port Vertical 34/- 1″ NPT
Side Port 1 Vertical 29/- 1″ NPT
Side Port 2 Vertical 29/- 1″ NPT
Side Port 3 10o Angle 45/- 1″ NPT
Side Port 4 10o x 10o Compound Angle 29/- 1″ NPT

200mm PTFE reactor lid

200mm Diameter Lid – Option 1
Base Port Type Taper Joint Port Size
Centre Port Vertical 34/- 1″ NPT
Side Port 1 Vertical 29/- 1″ NPT
Side Port 2 Vertical 29/- 1″ NPT
Side Port 3 10o Angle 29/- 1″ NPT
Side Port 4 10o x 10o Compound Angle 29/- 1″ NPT
Side Port 5 10o Angle 45/- 1.5″ NPT
200 mm Diameter Lid – Option 2
Base Port Type Taper Joint Port Size
Centre Port Vertical 1″ NPT
Side Port 1 Vertical 1″ NPT
Side Port 2 Vertical 1″ NPT
Side Port 3 10o Angle 1″ NPT
Side Port 4 10o x 10o Compound Angle 1″ NPT
Side Port 5 10o Angle 1.5″ NPT
Be the first to review “Asynt – PTFE Reactor Lids”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    Instagram did not return any images.

Main Menu